"I have been involved with making, restoring and repairing harpsichords, clavichords, virginals, spinets and early pianos for most of my working life, and the vast majority of my customers for brassware know the funny world we inhabit very well. I realise however that a website will inevitably reach others, so a few words of explanation might be appropriate. Harpsichord family instruments like pianos have large lids although not I hope quite so massive. The lids need to be securely fastened but also must be readily removed....for example when a harpsichord is used with a baroque orchestra the lid open would hide players and the music they make. The 'strap' hinges therefore are mostly fitted to the top surface of the lid and fasten to the spine, the pivot being below the lid; the different strap hinges have varying depths for the 'return' and there are fixing holes for the return to the edge of the lid as well as those on the top; these are fitted with a loose pin; some however have no return and are showing on the inside of the lid when it is open. Some of either type are made with a fixed pin and the lid slides off to the tail to remove it. The 'flap' hinges are meant for the joint between main lid and the front 'flap', which exposes the keys and the wrestplank, and are mostly fitted to raised battens on the top surfaces, angled so that the flap opens rather more than parallel to the main lid. Here the important dimension is the open width, since they have to fit onto the battens and not stick out. Locks are either of the 'lock & hasp' variety, or fitted into the top outside edge of the casework, either being very visible and therefore decorative. I'm sure there are many more ways of using any of these decorative hinges than I've thought of.....This is basically a one-man business; I don't pour the metal but I do all else, so any hinge could be given a loose pin if needed; or left with an unpolished but slightly rippled finish from a blast cabinet and glass bead, or even if you have the right object, cast in bronze or even silver (or possibly aluminium although we haven't tried this). The foundry is very small too so we have some flexibility. "
Visit website for more information and pricing of parts. (ed.)
Tags: David Law
Added on: Feb 02, 2008 | Hits: 895